WE HAVE HERE THE INTERNAL PART OF THE ELECTRICAL INTERCONNECT BETWEEN A DC SOLAR POWER SYSTEM BUILT WITH YOUR STANDARD INVERTERS

THE WAY THE CABLES ARE CONNECTED NOW, YOU CAN 100 PERCENT PERFECT CONNECTIVITY BETWEEN YOUR SOLAR PANEL SYSTEM, WHICH HAS YOUR INVERTERS, AND THE GRID TIE SO THAT YOU MAY CONNECT IT FROM THE HOME OR BUSINESS ELECTRICAL INPUT. SO BASICALLY, YOUR LOOKING AT A CUT OFF SELF INSTALLED SWITCH TYPE BREAKER PANEL. IN THE BOTTOM MOST PORTION OF THE BOX, YOU WILL SEE THAT THERE ARE TWO LINES COMING IN FROM THE AC OR ELECTRIC COMPANY PROVIDED CURRENT. ONE LINE RUNS THRU FROM YOUR NEUTRAL BACK AROUND AND UP INTO YOUR NEUTRAL LINE IN THE PHOTO ABOVE. THE SECOND LINE, YOU HAVE A HOT , THIS HOT IS IMPORTANT AS IT ESTABLISHES THE CONNECTIVITY NEEDED TO GET YOUR SOLAR PANEL SYSTEM GOING. NEXT AND FINALLY FOR THE THIRD LINE, YOU HAVE YOUR GROUND, YOUR GROUND IS OFTEN CONFUSED WITH THE NEUTRAL AS IT IS IN FACT DIFFERENT WHEN IT COMES TO HOME AND BUSINESS OR COMMERCIAL AC CIRCUITS. THIS LINE WOULD GO INTO YOUR LEFT PRONG OR HOT/LOAD, AND THEN INTERCONNECT THE NEEDED VOLTAGE GROUND TO ESTABLISH COMPLETE CONNECTIVITY WITH THE NEEDED POWER SOURCE, IF YOU HAVE ANY QUESTIONS, BE SURE AND LET ME KNOW, I WOULD BE HAPPY TO HELP YOU OUT, JUST FILL IN YOUR QUESTION BELOW, AND HIT ENTER.